How to Use BMW ENET E-sys to Flash F25 NBT

This is how to flash BMW F25 NBT with E-Sys ENET cable.

One way to get bmw esys enet is- to download BMW E-sys with luck, and build an ENET cable. This is the DIY guide: http://blog.eobdtool.co.uk/how-to-build-enet-cable-for-f-series-coding/

The other way is- to spend a little bit more money to buy a working cable, then this is a site that has been confirmed working:

http://www.eobdtool.co.uk/wholesale/bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series.html

You will need to put the car on a commercial grade charger, good for 50 amps minimum, as you cannot run the motor while flashing.

Here are the basic steps:

Go to Comfort Mode => TAL-Calculating
- Read and Save FA
- Activate FA
- Read and Save SVT Actual as SVT_ist
- Create an SVT Target
Under KIS/SVT Target Calculation Strategy, select Complete Flash
Select I-Step (shipm.) to match your original I-Level as read and shown in VCM I-Step (Shipment)
I-Step (target.) will be unselectable as it is fixed based on current PSdZData I-Level
Do a KIS/SVT Target Calculation and Save as SVT_soll
- Do a TAL Calculation and Save as SVT_tal

Go to Expert Mode => TAL-Processing
Load TAL (SVT_tal)
Load SVT Target (SVT_soll)
Select "Read FA" button.
Check radio button for "read VIN out of FA"
On ECU Tab, uncheck let top box in column "All" (All checked boxes should toggle to unchecked)
On ID Base Row for Kombi, make check boxes in blFlash, swDeploy, cdDeploy, and ibaDeploy columns.
Press Check software availability
Press Start and it will proceed with processing TAL to flash Kombi with new firmware.

The last- a good place with lots of great write-ups of BMW F series coding: http://bmw-f-coding.blogspot.com/

(06.2017) Free Download BMW ISTA 4.05.32 Standalone for ICOM

Here comes 06.2017 BMW Rheingold ISTA 4.05.32 the newest for you:

Below are free download links for BMW ISTA-D 4.05.32 Standalone + BMW ISTA-D license! Enjoy at your own risk and hope it helps!

You are going to download:

ISTA-D 4.05.32 Standalone Version

FASTA & HW check is off

Included last firmware for BMW ICOM & ICOM NEXT

And added BMW ISTA License.

BMW ISTA 4.05.32 Standalone Download:

Link 1

https://mega.nz/#!3RQxxAAa!bhObcmr3_uu_-1AWk3pJEqkpTWBbmlsjUhNsf7t9PNs

Or link 2

https://mega.nz/#!hpJAVaiD!D1kL8sAgnndFFYcmOmgEOQ5t_2TcqsVRMgMMNN8S3Bo

BMW ISTA 4.05.32 license Download:

https://mega.nz/#!d9wkzSSA!ugGded8kxwbsuwitbOmx1YolC2LNMeFInRxWKkQYu5U

No pass!!! No dead links!!!

Thank to Spider80...

Note:

This new ISTA 4.05.32 is still with unknown security, eobdtool.co.uk engineers can't assure you 100% working!

So which BMW ISTA Crack is tested100% OK with ICOM clone?

Here you go:

V03.2017 BMW ISTA-D 4.04.12 ISTA-P 3.60.2

BMW ISTA HDD WIN7

Compatible with ICOM A2, A3, NEXT

Not connected 9000 days remaining!

BMW ISTA Interfaces recommended:

BMWICOM A2 WIFI

BMW ICOM A3

BMW ICOMNEXT

BMWINPA K+DCAN Cable

BMW ENETCable

What functions can you do using ISTA with above tools?

--Module (ECU) errors reading and clearing

--Gearbox (transmission) and engine adaptations erasing

--Fuel injectors control, correction amount real time viewing, injector registering

--Engine mountings testing

--Mass air flow (MAF) testing and registering. Whole air system testing

--EGR system control and testing

--Turbocharger and related components control and testing

--Diesel particulate filter regeneration (DPF)

--Battery replacement

--Oil change and service interval reset

--Wiring diagrams live data, repair instructions, technical documents etc

And much more other functions...

BMW Rheingold ISTA 4.05.23 Update Information (06.2017)

Works with ALL BMW E and F series 1995-2017

Suitable for BMW Motorcycle

--Language: ENG, GER, FR, RU, OTHER

--Ultimate Ediabas/ISTA+ voltage control

--Hardware check disabled -can use the program on the slower laptops.

--ISTA contains all the functions required for programming vehicles of the F, G and I series and for Motorrad models with vehicle electrical system 2020 (BN2020).

--With Technical Information (TIS) and Wiring Diagram (WDS).

--Ediabas and all necessary tools included.

--Included components (32-Bit & 64-Bit)

--Included :

ISTA User Manual EN,DE, IT,PL,RU,TR,CZ,ES,FR,JP,KR,NL,SE

NET Framework 4.6 + Updates

Java Runtime Environment 8

DirectX 9.0c Extra files

General runtime files

Microsoft Visual C++ Runtimes (v2005 - v2015)

Microsoft Visual J# 2.0 SE

Microsoft Silverlight 5

Adobe Flash Player (Opera, FireFox, Internet Explorer)

Shockwave Player 12 (Internet Explorer Plugin

Ediabas

--BMW ISPI ICOM-FW 03-15-00

--BMW ISPI ICOM-Next-FW 03-15-00

BMW ISTA-D 4.05.32 Standalone Operating System Requirements:

Windows 7 (32-bit or 64-bit)

Windows 8 (32-bit or 64-bit)

Windows 8.1 (32-bit or 64-bit)

Windows 10 (32-bit or 64-bit)

BMW ISTA-D 4.05.32 Standalone Hardware Requirements:

Processor (CPU): Intel Pentium 2.0 GHz, Core Duo 2.0 GHz or better

Memory (RAM): 3 GB or more

Hard drive (HDD): 22 GB free space on disk

2017 BMW Dr. Gini B020 Free Download+ Install with EDIABAS

Here you can free download the useful BMW Diagnostic Program BMW Dr. Gini B020 2017 version! And BMW Dr. Gini installation guide also shared as below!

Free download BMW Dr. Gini B014+ B020+ EDIABAS 7.3.0:

https://mega.nz/#F!gI9l2K5L!9iMBCOrf9_eNYxKtouZmMA

Note:

1. In order to get Dr.Gini Program work, a program called Ediabas must be properly installed.

2. BMW cars produced before 2003 are not supported yet.

3. Dr.Gini Program need these communication interfaces:

BMW ICOM A2

BMW ICOM Next

BMW K+DCAN Cable

BMW ENET Cable

How to install 2017 BMW Dr. Gini Diagnostic Program?

Step 1: Before install Dr.Gini, first you need to install EDIABAS.

In the EDIABAS folder, run the EDIABAS _7.3.0.msi file to install the EDIABAS program.

It is recommended that you do not change any settings during installation.

Step 2: Unpack the "Setup Dr.Gini B014 EN.zip" and run the program to install Dr.Gini.

At the end of the installation, the menu that you want to run the program is checked, but since the setup is not completed yet, it is unchecked and the installation is completed.

Step 3: After extracting the compressed files in the ECU folder, copy them to the ECU folder where EDIABAS program is installed.

If you did not change the settings during installation, this is the C:\ EDIABAS\ ECU folder.

Step 4: Copy the EDIABAS.INI file located in the "INTERFACES" folder→ ENET Ediabas.INI folder and overwrite the C: \ EDIABAS \ BIN folder, as Dr.Gini will be connected by the ENET cable.

You need to copy the api32.dll file in the "API32.DLL" folder to the folder below for each operating system.

For Windows 7/8 / 8.1 / 10 64-bit operating systems:

C:\Windows\SysWOW64

For Windows 7/8 / 8.1 / 10 32-bit operating systems:

C:\Windows\System32

Step 5(The final step): Copy the Gini_B020.exe file to the C: \ EDIABAS \ BIN folder.

Sometimes, Gini_B020.exe is recognized as a malicious program and may be removed from an anti-virus program. If you feel that this process is unstable, you can just delete this file.

OK. Now BMW Dr. Gini installation is complete!

Connect your car with BMW Dr. Gini via BMW ICOM, ICOM NEXT, INPA K+DCAN Cable or ENET Cable. And it's ready to use!

Turn on car ignition and run the Dr.Gini.exe located in the C:\EDIABAS\BIN folder.

Click the "Identification" button at the bottom of the screen. Then the software will directly connect to vehicle.

Download E-sys 3.23 Psdzdata 50.3 Pass & Coding PIN

BMW E-sys 3.23 Psdzdata 50.3 download free with password and coding PIN:

http://pan.baidu.com/s/1mghYYLU

Password: E*G@rqVa

PIN: 2670

Tested 100% working with BMW Ethernet to OBDII Cable (ENET cable)!! Please make sure enet cable is fully functional! The BMW Esys download is 100000% woks if with this cable:

http://www.eobdtool.co.uk/wholesale/bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series.html

E-SYS is the BMW diagnostic software for BMW F series coding

The Psdzdata is basicly a pack that contains all the data needed for E-sys to be able to code a car, flash ecus and firmware update of the modules on the car

BMW E-sys 3.23.4 Psdzdata 50.3 is working with ENET cable for F series coding:

1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)
   2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )
   3. Display engine output and torque meter ( purely fun, look engine output )
   4. Cancel confirmation screen big screen boot delay
   5. Open the voice recognition function
   6. Three kind of bluetooth phone ringtones ( personality only )
   7. Increasing the cic memory address to 50
   8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
   9. The digital speed display ( fun only )
   10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
   11. Indoor cycling memories of the last time the state when engine off
   12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
   13. Increasing shift paddles
   14. The small screen to the large-screen display modify
   15. Pdc display vertical and horizontal
   16. Disable the seat belt status display – passenger seat
   17. Disable the seat belt status display – driver seat
   18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat
   19. Disable seat belt reminder – driving position
   20. Disabled unfasten their seat belts voice prompts – passenger seat
   21. Disabled unfasten their seat belts voice prompts – driving position
   22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
   23. Angel eyes open and cancel functions
   24 turn off the engine start-stop function turned on by default
   25, gps time synchronization
   26. Foot open the back cover
   27. Ds show s1-s7 selection
   28. Active sports gearbox program sport +
   29. Single microphone settings
   30. Engine off automatically unlock
   31. Internet applications
   32. Armrest usb playback video
   33. The maximum distance disable front camera view
   34. The maximum distance to disable the rear camera view
   35. Maximum speed disable front camera view
   36. The maximum speed to disable the rear camera view

…

Free download BMWAiCoder 4.6 + 5.0 BMW Coding EASY than E-Sys

Here you can free download BMWAiCoder 4.6 or latest BMWAiCoder 5.0 to work with ENET Cable for BMW coding! This way is much easier than E-Sys!

Easy BMW Coding Preparation: Software used

Free download BMWAiCoder 4.6 Multilingual:

https://mega.nz/#!YUEWAQiJ!yChazS-0_JjnhaiJtL_HU0uuoROMOZb6TjtZb0ssKrg

No pass

Free download BMWAiCoder 5.0 English:

https://mega.nz/#!KEEhQCwD!Fwdag4m8mMcbD9MjcTRtIYe3unSnTbVNPgDjSa70xsY

Password: cacaculopedopis

Easy BMW Coding Preparation: Hardware used

One cheap cable you need: BMW ENET Cable €15.99

Why choose BMWAiCoder to do BMW Coding instead of E-Sys?

To use the widely known BMW E-Sys, you have to install the Launcher for the token and install psdzdata. It’s complicate and not easy for beginner to learn how to use and become proficient.

While BMWAiCoder is a program that makes it easy! Lower entry barriers, easier coding… Just install BMWAiCoder and you can start to use NO NEED other programs.

Every coin has its two sides. Compared with E-Sys, BMWAiCoder is limited in function and sometimes not stable. But it’s good at fixing some coordinates quickly, rather than full-scale coding.

How use BMWAiCoder and ENET Cable to do easy BMW Coding?

Note:

Unzip BMWAiCoder software then you can use it directly, no need installation.

The software may be recognized as virus, never mind just confirm it. Or you can stop if you are uneasy about it.

Steps:

Connect the vehicle with laptop using BMW ENET Coding Cable and turn the vehicle ignition on.

Run BMWAiCoder.exe from the extracted folder.

When you run the program, the first firewall access pop-up may appear. Please select Allow access.

After running the program, the keyword download window will open automatically. Choose English and press the “Download” button.

If you do not see this screen or you accidentally hand it over, you can download it by clicking the “Custom” button as below:

After that you can use this software!

Press “1.DetectCar”then “2.Connect” to connect software with the vehicle.

Click “3.Get ECUs List” button to get the entire ECU modules list.

Now you can select the module you want to code from the list.

For example, to turn off the passenger seat belt warning, you can go to “01 ACSM” module, click “Read” button, select the parameter “Passenger seat belt warning”, change it to OFF then click “Write” button to confirm it.

If you want to cancel the modification and return to the original value, click the “Restore” button.

Know BMW Coding Programs types, functions and tools needed

This blog will make you clear about: How many different BMW Coding Programs are available? Where to download? What about their main functions? Which tools to work with? Check below and no more confusion!

BMW Coding Programs Types

BMW E-Sys

Most known BMW Coding software, most workshops use

Do coding includes VO coding for BMW F, G, I series cars

Free download latest BMW E-Sys 3.28.1:

https://mega.nz/#F!tc00gSIb!QSJatG3d3e4JVaDMt2aIhw

Tool needed: BMW ENET Coding Cable

BMWAiCoder

Can do simple and quick coding for BMW F series

More easier to use than E-Sys

Free download latest BMWAiCoder 5.0:

https://mega.nz/#!KEEhQCwD!Fwdag4m8mMcbD9MjcTRtIYe3unSnTbVNPgDjSa70xsY

Password: cacaculopedopis

Tool needed: BMW ENET Cable

BMW ISTA + Rheingold

Well-known BMW professional diagnostics, maintenance, programming software

Merge function of ISTA-D vehicle diagnosis, maintenance for F, G, I series and IST-P programming, update for E, F, G, I series cars

Free download latest BMW ISTA Rheingold 4.04.20:

https://mega.nz/#F!4Msz2RgL!jvZdlqN3SF75Z5rIRnWnYg!wVUlCBbZ

Latest professional tested OK: BMW ISTA 4.04.12

Tool needed: BMW ICOM A2

BMW INPA EDIABAS

Mainly used for diagnostic and vehicle service for BMW E series

Tool needed: BMW INPA K+DCAN USB Interface Cable

Free download BMW INPA 5.06+ EDIABAS 7.3.0 + NCS Expert 4.0.1 + WinKFP 5.3.1 + BMW Coding Tool v2.5.0 + NCS Dummy 0.6.0.4:

https://mega.nz/#!kAASwa7I!AJLVnnEBwLgzDPzBeQ4uQo60p1lbU2BsZofE-TBYGmk

Other BMW Coding Programs and functions

NCS-Expert: module and VO coding for BMW E series

WinKfp: module and VO coding for BMW E series

BMW Dr.Gini: software diagnosis BMW E, F series

NcdCafdTool: NCD, CAFD, FA, FP analysis BMW F, G, I series

Tool32: perform ECU file functions for BMW E, F, G, I series

ZGW_SEARCH: easy to monitor vehicle connection status or BMW E, F, G, I series

ETK: BMW Electronic Parts Catalog for BMW E, F, G, I series

How choose best BMW ENET Cable for BMW DIY Coding?

This blog is going to show you clearly how to choose a best-quality BMW ENET Cable for BMW DIY Coding. Is there any tips? Yes! Check below:

So-called BMW ENET cable is used for all BMW F series coding in conjunction with the programming software E-sys and the Psdzdata.

That is to say, if you want to do DIY coding you need this BMW ENET cable to connect the coding software with your car!

Here is what you need to know to start your journey in the coding world:

Tip 1:

All ENET cables are the same! You don’t need to buy the most expensive one because they all do the same thing.

This however doesn’t apply to K+DCAN cables for E series coding because they are completely different.

Tip 2:

The BMW ENET Coding Cable for F series is basically an Ethernet to OBD2 cable, the Ethernet end for your laptop and the OBD2 side for your cars connector.

How to select an ENET Cable with good quality?

You should check if it’s tested and soldered well and never had an issue with it (5 feet length is enough).

Like this one:

http://www.eobdtool.co.uk/wholesale/bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series.html

BMW ENET Cable using tips:

1. When connecting to your car through E-sys, make sure you set the ignition on without starting the car. This is important or you won’t have the option to connect through VIN (it will be grey under the target menu).

2. When DIY coding, make sure you place the laptop on the passenger seat or in your lap without moving around too much. If the Ethernet port is not exactly in tip top shape it could move or disconnect.

That’s not an issue when not doing any actual coding but could be an issue when E-sys is writing the values on the module you’re working on. You could corrupt the module data and it`s not the most fortunate of situations.

It can be fixed but you’ll ever never want to get to that point, so always pay attention to what you’re doing.

3. When disconnecting the Ethernet port, don’t just pull the cable! Always press the top side to release it first.

4. Most F series cars will have the OBD2 port under the dash, above the pedals. Location of the OBD2 port is where the BMW ENET cable is connected.

That’s all. Hope it helps!

Free download BMW ISTA 4.04.31 Standalone + ISTA-P 3.61.2 for ICOM

04.2017 BMW ISTA Rheingold software update here! This blog will show youBMW Rheingold ISTA-D 4.04.31 Standalone + ISTA-P 3.61.2 free download links in mega. Check below for more details!

Free download BMW ISTA 4.04.31 Standalone + SQLiteDBs EN-DB V4.04.31 + Tool

https://mega.nz/#F!4Msz2RgL!jvZdlqN3SF75Z5rIRnWnYg!tZtkABRY

No pass!

Before unpacking do UNLOCK.

Use the latest WINRAR 5.11 and above to unpack.

Including Patched EDIABAS 7.3.0.msi, Net Framework 4.5.2, Net Framework 4.6.2, vcredist x64, vcredist x86, RCleaner V4.4.exe, vs90 piaredist.exe

Free download BMW ISTA-P psdzdata V3.61.2 Lite

https://mega.nz/#F!tc00gSIb!QSJatG3d3e4JVaDMt2aIhw

No pass!

Note: BMW ISTA 4.04.31 is still with unknown security. So mates enjoy at your own risks!

Is there any newer version of BMW ISTA 100% tested OK and safe?

Yes! Here you go: 03.2017 BMW ISTA 4.04.12 HDD for WIN7 Multi-language

BMW ISTA 4.04.31 and ISTA 4.04.12 Interface requirements:

BMW ICOM A2

BMW ICOM A3

BMW ICOM Next

BMW K+DCANcable

BMW ENET cable

BMW ISTA 4.04.31 Operating system:

Windows 7 (32-bit or 64-bit)

Windows 8 or 8.1 (32-bit or 64-bit)

Windows 10 (32-bit or 64-bit)

BMW ISTA 4.04.31 Hardware requirements:

Processor (CPU): min 2.2 GHz Dual Core or 4.4 GHz Single Core CPU (Summary of Cores or Threads should be more than 4.4 GHz)

Memory (RAM): min 4 GB

Hard drive (HDD): min 250 GB free space on disk C: before installation

BMW ISTA 4.04.31 Installation tips:

We first install the program itself via .msi, or we can base the base on the STANDALONE version. We unpack and add the database to the folder x: \ ISTA \ SQLiteDBs \.

Database files can be packed originally (.istapackage) or .rar.

To get a database from the .istapackage archive you need to change the extension to .rar and extract as usual. All databases in. \ SQLiteDBs directory should have a .sqlite extension.

The license to standalone is in a folder with RG.