NCS Expert tutorial French made the E89 series for beginners

Question:

Frankly for NCS Expert I totally floundering .... that's why I wanted a tutorial in French ..

I have an E53 X5 so rain sensor, headlights washer installed, xenons lights; Bluetooth module installed by me but that does not work ....

How to Handle

So for starters, I recommend you read the ECU ncs with different expert and save them in case of bad coding.

(Namely, it is the manipulation for E89 series but it should not really change.)

1: Lance NCS Expert

2: File: load profile: expertenmodu or revtor

3: F1 and F3: Choose your series and CAS

4: F6

5: F4 then select ECU

6: F4 to ECU reading and close the hex file that appears

Then go ncsexpert \ work folder and copy the file and rename the FSW_PSW.TRC the name of the selected ECU. Ex: CAS Original.TRC

Repeat the same manipulation for the other boxes.

Once all this is: coding

For the bluetooth: I do not know what type of install you did exactly but begins by ECU this list for your series and then we'll see.

To sunroof when it rains:

1: Lance NCS Expert

2: File: load profile: expertenmodu or revtor

3: F1 and F3: Choose your series and CAS

4: F6

5: F4 then select ECU FZD

6: F4 to ECU reading and close the hex file that appears

Then go ncsexpert \ work folder and right click, open it with notepad FSW_PSW.TRC

Find:

REGENSCHLIESSEN

nicht_aktiv

Change in:

REGENSCHLIESSEN

aktiv

Automatic closing roof opening with rain sensor (rain sensor service)

To test the operation, put the ice essuis automatic and throw water on the rain sensor.

And also reset the roof by pressing for at least 2 minutes on the button to crack it performs all its cycles (not release the button until it is returned to its closed position).

And eventually:

Find:

REGENSCHLIESSENTIL

nicht_aktiv

Change in:

REGENSCHLIESSENTIL

aktiv

Automatic roof closing the opening in Trigger wiper essuis

Do next file, save as

File name: FSW_PSW.MAN

File type: all files (important)

Back in NCSExpert:

F5 and choose coapiReadSgGetFswPsw "ok then a window that opens.

F2 and choose SG_CODIEREN

F3 to start writing code

Once finished it will be marked coding coding ended

For lava headlights:

1: Lance NCS Expert

2: File: load profile: expertenmodus or revtor

3: F1 and F3: Choose your series and CAS

4: F2 - Enter FA, your serial and VIN OK

5: Added $ 502, Ok

6: F6: Back

7: F4: Process and CAS ECU

8: F2 - Change Job

9: FA_WRITE

10: F3 - Execute Job

11: F1 - Change ECU then FRM

12: F3 - Execute Job

Restart NCS Expert

Load Profile

expertenmodus or revtor

F1 - WINE / ZCS / FA

F3 - ZCS / FA f.ECU

Your series

CAS

F6 - Back

F3 - For Process

We choose the ECU that is used by the option that is added to (eg FRM for xenon lights aftermarket) See therefore what ECU is the flagship lava, I would say FZD can be too.

F2 - Change Job

SG_CODIEREN

F3 - Execute Job

Finally, more than to test it.

This is from obdtool: Best car diagnostic tools for sale website technical support: NCS Expert tutorial French made the E89 series for beginners