As far as we know, it is sometimes
necessary to update the firmware of BMW ICOM.and this is the clone ICOM
firmware update guide, learned from a professional technician on a forum.
Device to use:
Steps to update China ICOM firmware:
1). Use your cable and connect ICOM to port
2). Power ICOM by 12V power adapter or from 1x DLC
3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502
4). Click "Update Firmware",and you can find the version of firmware.
5). Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM", click "Send the file"
6). When it will say "Write the image file to the flash?", click "Yes", then the ICOM led it will been RED
7). When it will say "The SYSTEM IMAGE update was successfull", click "Update Firmware"
8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION", click "Send the file",the file is big so it will take some minutes to finish have patience.
9). When it will say "Write the image file to the flash?", click "Yes", then the ICOM led it will been RED again
10). When it is ok, click "reboot".
2). Power ICOM by 12V power adapter or from 1x DLC
3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502
4). Click "Update Firmware",and you can find the version of firmware.
5). Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM", click "Send the file"
6). When it will say "Write the image file to the flash?", click "Yes", then the ICOM led it will been RED
7). When it will say "The SYSTEM IMAGE update was successfull", click "Update Firmware"
8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION", click "Send the file",the file is big so it will take some minutes to finish have patience.
9). When it will say "Write the image file to the flash?", click "Yes", then the ICOM led it will been RED again
10). When it is ok, click "reboot".
没有评论:
发表评论