BMW Standard Tools is the software
suite distributed by BMW Group that contains several interoperating
applications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.
Hardware:
A PC
(Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit)
How to setup BMW Standard Tools 2.12?
Step 1: Download BMW Standard Tools 2.12
Download
here and install follow system prompts:
Step 2: Download and install INPA
Step 3: Download and install NCS Expert ENG
Download NCS-Expert software here and install
Step 4: Download and configure INPA K+DCAN cable
Make
sure your EDIABAS should already be configured to STD:OBD for use with INPA
cable.
Download
EDIABAS configurator here:
This tool (in C:\EDIABAS\Ediabas-Konfigurator folder) allows
you to easily change the ediabas.ini to your desired interface. So if you are
switching from INPA to E-Sys you could use this to switch from STD:OBD to ENET.
Set COM
port for INPA cable
Connect the
INPA DCAN
cable with PC
Install
device deriver
Come to
My Computer>>Device Manager>>Ports (COM&LPT)
In this case it's COM5. We need to change this in the obd.ini file located
in the c:\ediabas\bin folder.
Right click on your INPA cable driver for
example mine is labeled "USB
Serial Port
Now every driver is different but the
important part is the settings such as latency timer and received and transmit
bytes. See pic bellow for the ideal settings. You may also change the COM port
number here as well for tutorial I left it at 5. Once your changes are done we
can proceed by clicking OK to accept the changes. No close all windows to
return to the desktop.
Step 5: Change the OBD
Browse
to C:\EDIABAS\BIN and find file obd.ini and
open it with an editor (e.g Notepad)
First 3 lines will look like this...
[OBD]
Port=Com1
Hardware=USB
Port=Com1
Hardware=USB
Need to change the Port to reflect our INPA cable which in our case
is COM port 5. So change it to look like this...
[OBD]
Port=Com5
Hardware=USB
Port=Com5
Hardware=USB
When done click File -> Save and exit
NOTE: Remember which USB
port you connected your cable to as plugging it into a different USB port will
allocate the INPA cable to a different COM port
and neither tool will see the cable until the original USB port is used again
or changed in device manager and obd.ini as mentioned above.Now to test if your
cable installed correctly. Plug it into the vehicle's OBD port and open
INPA.
Step 6: SPDATEN Files
Download and install SPDaten files (always
recommend the latest) in this case it is 50.2 until I finish zipping and upload
SPDatens 51.0 and upload it to share. (Follow the
instructions provided at the end of the blog labeled "How to start WinKFP" which will explain how to import the SPDaten files
to WinKFP)
Once downloaded you can now
**EDITED 10-12-2013**
For NCSExpert to install or update the
daten files, copy the files from SP-daten-E##\daten to
the C:\NCSEXPER\DATEN\E##\ (where E## is whatever chassis you're
updating). You will also want to copy the files
from SP-daten-E##\SGDAT to C:\NCSEXPER\SGDAT (they're not
separated into different chassis in NCS Expert, so you just want to copy and
paste everything to that directory. Overwrite everything it asks about). Then
copy the files from SP-daten-E##\ECU to C:\EDIABAS\ECU
After copying the daten files to
c:\NCSEXPER\DATEN\E## copy the following files to the following locations:
copy C:\NCSEXPER\DATEN\E##\*.000
C:\NCSEXPER\DATEN\
copy C:\NCSEXPER\DATEN\E##\*.DAT C:\NCSEXPER\DATEN\
copy C:\NCSEXPER\DATEN\E##\*.ASC C:\NCSEXPER\DATEN\
copy C:\NCSEXPER\DATEN\E##\*.DAT C:\NCSEXPER\DATEN\
copy C:\NCSEXPER\DATEN\E##\*.ASC C:\NCSEXPER\DATEN\
PS: How to start WinKFP?
1.
Install WinKFP and come to direction
2. After installation the directory (Drive letter):\EC-APPS\NFS\SGDAT
contains file CABI.h only, and doesn’t contains files, required for working.
3. Mount the Progman disk in virtual drive
(or insert in usual DVD-drive), extract all files SP-daten-Exx.rar from
directory (Drive letter):\CIP-Installer\bin, each one in its own directory.
(You must get directories like SP-daten-Exx)
4. Now copy all *.IPO files from every
directory (Drive letter):\SP-daten-Exx\sgdat to directory (Drive letter):\EC-APPS\NFS\SGDAT.
For this purpose better use Total Commander, it allows to overwrite elder files
with newest. This directory now looks like this:
5. In the same way refresh directory (Drive
letter):\EDIABAS\Ecu with files taken from (Drive letter):\SP-daten-Exx\ecu 6.
Run WinKFP
6. Run
WinKFP software
7. Choose “Import/Export – Import – Assemly
line data” and import all data needed from directories (Drive
letter):\SD-daten-Exx\DATA Details how to import assembly line data are given
in official manual for WinKFP
8. After importing the data, copy all files
from directory (Drive letter):\SD-datenE70\DATA\gdaten to directory (Drive
letter):\EC-APPS\NFS\DATA\GDATEN, overwriting all existing files.
Note: If you use Progman v.30 for updating
WinKFP, it has error in file \GDATEN\Sgidc.as2. Simply open this file with
Notepad and delete line 165.
WinKFP is ready for programming
没有评论:
发表评论